Friday 31 May 2013

Samsung Galaxy S4 the smartphone sensation

It’s here: the most anticipated smartphone of the year. However, we’ve also seen new Android upstarts – the HTC One and Sony Xperia Z.

The design, for a start, is a very gentle upgrade to last year’s Galaxy S3. If you felt the S3 looked too plasticky, you’re unlikely to be impressed, but with straighter lines and a subtle texturing effect beneath the glossy plastic, it’s not a bad looking phone. It’s the same height and 0.7mm thinner than the S3. Despite that, there’s a bigger screen – it’s five inches instead of last year’s 4.8 inches – and it now boasts a full-HD resolution.
The Super AMOLED screen delivers rich, vivid, bright colours – those colours don’t look as over-saturated as they can on some other Samsung screens, either. In fact, this is one of the best phone screens yet. The HTC One’s screen is marginally sharper, but that’s because it’s packing the same number of pixels into a smaller space.

Many smartphones, especially high-end ones, prefer sealed battery units – you can squeeze in more power when you’re not wasting space on the cases removable batteries need – but not the Galaxy S4. It’s stuck with a removable back, meaning the phone creaks when flexed. You can swap batteries for extended use, but who does that?

Another benefit to the removable back is the S Cover, which wraps the phone and closes over the screen with a magnet. But it’s the new, innovative features that really make this phone stand out, though.

Last year’s Smart Stay technology, where the front-facing camera monitored your eyeballs and dimmed the screen when you weren’t looking directly at it, has been enhanced. Now, if you’re watching video and your focus strays, Smart Pause stops playback until you look back again, at which point it smoothly restarts. It works splendidly and the same principle is used, in conjunction with the accelerometer, to control scrolling on web pages – when you reach the bottom of the page, tilting your head prompts the phone to scroll back up for you. This is called Smart Scroll and it is more gimmicky and jittery than Smart Pause.

It’s all part of a new wave of features that mean you don’t have to touch the touchscreen. Pass your hand near the phone when it’s in standby and the screen gently wakes, shows a speckled background with motes floating through light, and calculates how many texts, emails or missed calls you have before turning off again.

Similarly, if you hover your fingers near an address book contact, more details are revealed, although only in Samsung’s Email app, not the Gmail one. It’s handier than opening individual mails and gives you a six or seven-line preview of communications.

You can also turn pages by waving your hand over the screen. If you use your phone when cooking or just have an extreme aversion to screen smears, it’s a nice (non) touch. Like some Nokia Lumias, you can also use the S4 with gloves on.

With your hands now free, Samsung wants you to get active. To this end, a built-in pedometer tracks your steps, sending a notification reward when you reach a set goal. It knows whether you’re walking, running or climbing stairs and there are temperature and humidity sensors. It’s all part of S Health. There’s also S Voice – Samsung’s slower sister to Siri – and S Translator where you speak a phrase at the phone to hear it parroted back in another language. A good data connection is needed for this and clear diction helps, too.

The S4’s 13-meg camera delivers strong shots and is easy to use, although it has familiar struggles shooting in low light – of its smartphone rivals, only the HTC One, with its “fewer-but-better pixels” strategy, really thrives in low light. Again, there are features galore, including the ability to shoot with the front and rear cameras simultaneously, squeezing a tiny headshot into your panoramic vistas. You can also add a short audio clip to photos, or cluster a burst of action shots in one picture.

The Exynos octacore chip manfully handles anything you throw at it, never slowing down or hesitating, no matter how many programs you have running at once. It’s efficient, too. The battery keeps going for the whole day with ease. As with all heavily used smartphones, though, a nightly recharge is essential. The Android Jelly Bean OS again helps with smooth running.

Connectivity is up there with the best, including NFC and an IR sensor, which means you can use the S4 as a universal telly remote. So, is this the best Android smartphone yet? Its combination of power and innovation certainly puts it amongst the Android elite, but for our money it falls just short of the HTC One, while its camera is bested by the Sony Xperia Z, which also boasts waterproofing.

The Samsung Galaxy’s star has faded slightly, but there’s still no denying its wow factor. A big, powerful smartphone that’s not afraid to innovate, it’s a five-star wonder.

SPECIFICATIONS
DISPLAY: 5-inch, 1080x1920, Super AMOLED
OS: Android Jelly Bean
PROCESSOR/RAM:  Exynos octacore/2GB
STORAGE: 16GB
CAMERA: rear cam 13-MP/1080p at 30fps, front cam 2-meg/1080p
CONNECTIVITY: N Wi-Fi, 4G, NFC, Bluetooth 4.0, IR sensor, GPS, microSD slot
BATTERY: Battery life Up to 17 hrs talk time
DIMENSIONS: height 136mm, width 70mm, depth 8mm
WEIGHT: 130g
PRICE: Rs.41,500

Read More...

Sunday 26 May 2013

HUAWEI WIFI E5331 - portable Wi-Fi router

With the popularity of data hogging smartphones, tablets and televisions, there has been a surge in the demand for portable Wi-Fi routers.

The Huawei Wi-fi E5331 is a compact router meant to work with your data SIM. This white pebble-shaped lightweight router is small enough to go in your pocket. It has a OLED display as well as four LED icons for network, Wif-Fi, battery and message. A green glow means a strong signal and full battery, whereas red is indicated no signal and low battery.
Configuring the router was easy and we just had to insert the SIM card in the slot below the battery. When we turned on the router, we were able to detect the network and connect to the router. You will need to read the manual though.

Wi-Fi E5331 comes with a 1500 mAh rechargeable battery that gave us close to four hours of work on a single charge. The Huawei E5331 can connect up to five devices and offer a maximum of 21mbps. Our Reliance SIM gave us a download speed of 3.16 MB and upload speed of 1.60 MB.

PRICE: Rs.3,900
Read More...

HUAWEI G510 Review and Specifications

Huawei’s Ascend G510 doesn’t look all that great and is similar to many other Android smart phones in the market. Its 4.5-inch capacitive display is a fingerprint magnet. There is Huawei’s branding on the top with three capacitive touch keys below the display. A 3.5-mm headphone jack is placed on the top with the lock control, volume control and charging jack on the left panel. The black textured plastic back isn’t impressive either.
Huawei has done away with the stock Android interface by loading its own Emotion UI. So, the phone doesn’t have an app launcher tray anymore. Instead, all apps are placed on the homescreen, which gets a bit difficult to navigate through. The only respite is the five icons that can be docked at the bottom, which remains static across the nine homescreens. Instead of enhancing the experience, Emotion UI has spoiled it further. We noticed a lag while navigating through the home-screens or launching apps. A third-party launcher did not bring in any difference in terms of performance. This despite the dual-core processor. The performance is shockingly slow and the Quadrant score of the Huawei G510 was 2451. The only positive was the smooth browsing experience over the high speed Wi-Fi network.

The Huawei G510 failed to impress us in the camera department as well. It has got a 5 MP camera onboard. At first, the images captured looked decent. However, when the images were transferred to a PC, we noticed a lot of distortion and lack of clarity.

Even on full brightness, the display isn’t good enough to enjoy videos or movies. The sound output is just about average. The smartphone packs in a 1700 mAh battery that managed to hold the charge for a day with very limited use.

SPECIFICATIONS
4.5-inch display, Android 4.1, 1.2GHz dual-core processor
512 MB RAM
5 MP camera
4GB internal storage, expandable memory card slot
1700 mAh battery
PRICE: Rs.10,990
Read More...

SONY XPERIA SP Review and Specifications

Xperia SP, the latest device from the Sony stables, apparently wants to follow the footsteps of the flagship Xperia Z and has a straight line design with curved edges. The review unit we got was white, but framed by grey. The 4.6-inch display has a 720p resolution with Sony's now popular translucent line that illuminates for notifications at the bottom. The slightly curved plastic back panel that holds the SIM card and memory card slot spoils the design a bit. Moreover, the battery is not removable and the phone feels a bit heavy to hold.
The Xperia SP has got the same old Sony interface with shortcuts for music and camera on the lock screen. There are no capacitive touch keys anymore and the empty space below the display looks a bit wasted. The three navigation icons are now virtual and remain static across most screens.

Sony has loaded a 1.7Ghz dual-core processor with 1GB RAM, making this a very powerful and sprightly phone. Most of the apps loaded quickly and there wasn’t any lag while playing games. All this felt amazingly fast and we were proved right with the Quadrant benchmark score of 7557, which was much higher than the Samsung Galaxy Grand Duos (3817 marks) and even the quad core powered HTC One X.

But messing up the overall feel of the phone is the mediocre 8 MP camera. The Superior Auto feature found on the Xperia Z (that detects the image capture mode automatically) is present in the Xperia SP as well. But expect good results only under perfect lighting condition. The camera performance in low-light conditions is awful and the results look worse on a large screen. Sony has packed in a big 2370 mAh battery that managed to survive a day and a half on average use.

Specifications
DISPLAY: 4.6 inch display
OPERATING SYSTEM: Android v4.1
CHIPSET: 1.7GHz dual core processor, 1GB RAM, 8GB internal storage, expandable up to 32GB
CAMERA: 8MP rear camera
WEIGHT: 155 grams
BATTERY: 2370 mAh battery
PRICE: Rs.25,990
Read More...

The Best Wireless Speakers

MUSIC Everywhere, Without WIRES
Even hi-fi audio can now be streamed wire-lessly from a source to multiple speakers. From top-end solutions like Audio Pro Wireless to more common Bluetooth and Apple’s very own AirPlay there are many ways to share content all over the house. You no longer need wires to enjoy great music.

LG CM9730
A monster of an audio player with sound that can shatter glass metres away. But this mini Hi-Fi can play music from your phone and you wouldn’t guess that the source is not even in the same room.

Price: Rs.75,000
Bose SoundLink
This might look small, but it produces stunning music as you would expect from this company. The small audio box is AirPlay enabled and is easy to set up. It can also play music the conventional wired way.

Price: Rs.22,388
Sony’s ZS-BTY52
This NFC-enabled speaker lets you stream music from a compatible phone by just tap- ping the two devices together. In case you don’t have an NFC phone, then it can use Bluetooth to play from iOS or Android devices.

Price: Rs.8,990
Read More...

Samsung ATIV - The Ultra Tablet

The Samsung ATIV Smart PC Pro, simply put, is an Ultrabook that comes in the form of a tablet. It has an 11.6-inch Full HD display and runs on Intel Core i5 power. It does subscribe to a similar concept as ASUS’s Transformer Android tablets which employ detachable keyboard docks that enhance functionality. Samsung’s keyboard, however, does not feature an extra battery.
The good thing about this form factor, however, is that it allows users to just pick up the tablet and leave the additional heft behind when they don’t need it. Conversion is also done quickly and painlessly, and when put together, the portions attach securely. We were satisfied by the unit’s build quality as a whole; its Gorilla Glass screen protection lends much confidence for its often-touched display. We have major reservations, however, about its plastic back plate.

The keys on the keyboard dock were an absolute dream to type on. They had plenty of travel (for something so thin), and were very rigid, perfect for typists who like plenty of feedback. The clickpad, on the other hand, feels very flimsy. You probably won’t need the clickpad so much though, as the ATIV Pro also comes with an S-Pen – the same Wacom-powered stylus technology seen with Samsung’s Galaxy Note devices. (As such, the ATIV Pro also comes with the proprietary S-Note app.)

Icons and text in 1920 x 1080 resolution on an 11.6-inch screen may appear small, but this display does wonders with high-definition multimedia. At 400 nits, it’s also bright enough to be used comfortably in well-lit areas, while its IPS panel allows wide angles of viewing. To complement the visuals, two 0.8W speakers are set at opposite edges of the tablet. We found the speakers capable of fairly loud, clear quality audio that is more than adequate for personal usage.

On our PCMark 7 and 3DMark 11 test runs, the ATIV Pro scored slightly lower than its Windows 8-based peers (4021 and 1035, respectively), although given that it sports the same set of standard Ultrabook components, most users wouldn’t be able to feel any performance shortcomings in actual use, unless of course you literally hold out a stop watch to time some tasks to compare with those of other machines. The ATIV Pro made up with battery life though, ranking tops on Powermark with a 296-minute run. Be wary, though, that the keyboard dock has its own power draw.

For an Ultrabook convertible, the Samsung ATIV Smart PC Pro has a good arrangement between power, features, and battery life

SPECIFICATIONS
CHIPSET: Intel HM76
CAMERAS: 5 megapixels (rear), 2 megapixels (front)
OPERATING SYSTEM: Windows 8 Pro
CONNECTIVITY: Wi-Fi a/b/g/n, USB-to-Ethernet dongle, LTE, 3G, Bluetooth 4.0, USB 3.0, 2x USB 2.0, micro- HDMI, microSD slot
DIMENSIONS / WEIGHT: 304 x 189.4 x 11.8mm / 878g (tablet only)
Read More...

ASUS Zenbook Touch UX31A Review and Specifications

TOUCHING YOUR INNER ZEN
Following the release of Windows 8 last year, ASUS has responded with new products that take advantage of this touch-centric operating system. From its Zenbook lineup, the UX31A gets an update with the release of the Zenbook Touch UX31A.      
Building on the success of the “Zen” design, this Ultrabook sports the same brushed aluminum frame with Zen circles on its lid. The immediate difference one would notice is that this model employs a touch-capable Full HD display to take full advantage of Windows 8. Other than that, it still carries the positive aspects we’ve seen on its predecessor – its light weight (1.3kg), thinness (3-18mm), and premium build quality.

Its extreme thinness is achieved by compromising its ports. You won’t be getting regular Ethernet and display ports, but worry not as you still get them via included dongles. Aside from that, you have two USB 3.0 ports, an SD card reader, and a 3.5mm audio jack combo.

Going over its keyboard, we see the same backlit island-style design which offers enough travel for comfortable typing. As for its clickpad, it seems to have been updated, as we found it to be easier to click and more responsive than the one found on the Zenbook Prime UX31A. It also allows for typical Windows 8 gestures.

One would surely enjoy photos and videos on its IPS display due to its vibrant color reproduction and great viewing angles. Adding to that is sufficient power from its speakers to make it hearable in a mid-sized room.

The sample unit we played around with came equipped with a 1.9GHz Intel Core i7-3517U, Intel HD Graphics 4000, 4GB of DDR3 memory, and a 256GB SSD. Given this set of hardware, it provided us with more than acceptable performance in our tests, as it scored P665 marks on 3DMark 11, 3903 marks on the new 3DMark, and 5061 marks on PCMark 7. Benchmarks aside, this Ultrabook can readily handle daily office work, multimedia consumption, and a bit of gaming on the side.

Ultrabooks are known for their battery life, so to test the Touch UX31A’s stamina, we ran Powermark and a 720p video loop test. On Powermark, it lasted for 198 minutes with continuous usage simulation, and for our loop test, it lasted 269 minutes. The 1080p display definitely adds up to the system’s power consumption.

Not minding its price, the ZENBOOK Touch UX31A is definitely an Ultrabook to consider with its stylish body that houses enough performance to enjoy modern-day content.

SPECIFICATIONS
GRAPHICS: Intel HD Graphics 4000
OPERATING SYSTEM: Windows 8 SIngle Language
CONNECTIVITY: Wi-Fi a/b/g/n, Bluetooth 4.0, 2x USB 3.0, micro-HDMI, mini-VGA, SD card reader, Audio jack combo
DIMENSIONS / WEIGHT: 325 x 223 x 3-18mm / 1.3kg
Read More...

Wednesday 22 May 2013

Renault's New Electric Two-Seater Vehicle

Design and Description
Renault introduces new ultra-mobile electric two-seater vehicle, The 'Twizy'. Twizy may be mistaken for a scooter at first sight, but when you look at it clearly, it actually possesses all the aspects of a car. Twizy has a chassis with four wheels similar to others cars but in its own style, a steering wheel, pedals and an amazing enveloping body for two occupants sitting in tandem. The Twizy is mainly designed to attract busy, car-owning urbanites who are looking for a second vehicle, also for those younger drivers looking for a safe way to start driving. This ultra-compact quadricycle comes in two versions.
  • The first with a 17hp electric motor delivering a maximum torque of 57Nm and a top speed of 80kph
  • The second version, is driven by a 5hp motor with a maximum torque of 33Nm and a top speed limit of 45kph.

Both versions of this vehicle are equipped with a 6.1kWh lithium ion battery which has a heavy capacity and can cover up to 100km over a standard urban cycle and the most interesting point is that the Twizy can be fully recharged in just 3 hours and 30 minutes with the use of a domestic socket. customizability makes the Twizy even more attractive as customers will be able to choose from three various levels of trim and four beautiful colors  which match up to their personality. On top of this, there are other customization options including gullwing doors, a glass roof and a wide array of accessories.
Attracting Features
  • The Renault Twizy is a compact vehicle that not only helps drivers save fuel in urban environments but is also fun to drive.
  • It only takes 3 hours and 30 minutes to fully charge the Twizzy and it can be done using a domestic socket.

Read More...

Monday 20 May 2013

Titanium Backup for Android - Back up and restore your apps

Avoid factory reset blues by restoring backed up software in minutes
Whether you’re resetting your phone to factory settings in order to overcome a problem or you’re updating Android, losing your apps can prove a bit of a nightmare. Sure, you might use Google Play to get your apps back, but installation this way is slow, with software only available to be reinstalled one at a time. So what other solutions are there? ES File Explorer is popular, but perhaps the ultimate backup/restore app for Android is Titanium Backup, a tool that can easily and quickly back up and restore apps from a folder on your SD card or elsewhere.
With Titanium Backup you can do so much more than back up apps, with messages, calls, bookmarks and Wi-Fi access points among the options.

There is a caveat, however – in order to use Titanium Backup, your Android device must first be rooted. This is a small price to pay for such flexibility though.

1.Configure your phone
After installing this free app from Google Play, you should see notices to alter your system configuration. You can save time with this beforehand, however – open Settings>Applications and check the Unknown sources box, then Developer options and check USB Debugging.

2.Check storage in Titanium Backup
Upon first launch you will need to make a couple of checks. First, ensure that you are happy with the listed backup directory – you can change it in the Preferences menu. Also check that your Android storage is sufficient to run a backup.

3.Prepare to back up
Via the Backup/Restore screen, view the list of the apps that will be backed up. To back up an app, tap it and select Backup! from the sub-menu. Closer inspection will reveal the Restore option. Tap this to restore the app from its backed up state.

4.Back up apps in batches
Scrolling through the list and backing up applications one at a time might prove heavy going, of course, which is why Titanium Backup offers a batch option, available via the icon in the top-right corner. Use this to back up apps, system data, or both.

5.Setting backup options
Backing up your apps in bulk is easily done by tapping Run, confirming the selection and tapping the green tick to finish. Depending on the number of apps, this might take a while to finish. App backups are stored in the location you checked earlier.

6.Restoring apps
In the Batch screen, scroll down to the Restore section and use the appropriate option to restore your backup. Titanium offers more than just backups, and you will notice many options here, including delete tools and even moving downloaded apps to the SD card.
App Screenshot
Read More...

Home2 Shortcut for Android - Remap your device buttons

Improve your mobile efficiency by remapping hardware buttons to launch favourite apps

How many of your Android device’s hardware buttons do you use? You might, for instance, never use the camera, thereby inadvertently creating a redundant button. But it doesn’t have to be this way – you can configure your Android camera button (or any others) to behave in a particular way, launching specific apps that can make life easier.

This is made possible with an app such as Home2 Shortcut, with which you can reconfigure the Home, Search, Menu, Back and Camera buttons on your phone or tablet in order to quickly launch your favourite apps without browsing menus.
1.Home2 Shortcut
After installation you will want to run Home2 Shortcut and start configuring Android’s hardware buttons. However, due to the nature of the app and its ability in reassigning key mappings, the ‘Complete action using’ box will be displayed. Avoid tapping the Always option!

2.Get started
Get started by tapping Choose Application to assign an app to a double-tap of the Home button. Continue by configuring the double-tap speed, which features several options, from Very very short to Very long. This can be changed after mapping the hardware key.

3.Home application
Even if you don't want to configure the Home button, you still need to select your preferred home application. With this set, you shouldn’t have any problems returning to the home screen, so you can turn your attention to the key you wish to remap.

4.Set new actions
Use Other key settings to find the long press option for your phone’s camera button, and tap the Choose Application button to find the app you wish to use. Click OK to confirm, then Back and Close. You can now try your remapped hardware button.
App Screenshot
Read More...

Wifi Booster 2013 for Android - Boost your Wi-Fi signal

Don’t feel limited by your current wireless networking speed – use a Wi-Fi boosting app to make sure you’re always connected to the fastest available signal

A popular way to deal with weak wireless signals is to install the free Wifi Booster 2013 app from Google Play. Note that this is an ad-supported app.
Wifi Booster 2013
The app features a very simple UI, enabling fast wireless signal optimisation at the tap of a button. Optimisation occurs in the background – you don’t have to do a thing!

One downside of wireless booster apps is the impact on your device’s battery. Wi-Fi boosters require additional power to increase wireless speed, so don’t use one if your battery is low.

App Screenshot
Read More...

USB OTG Helper - Increase your Android storage

Seamlessly add a USB flash drive to your device and make extra room for a multitude of media

As our phones get faster and their screens get bigger they are becoming more and more useful for consuming content. But HD movies are enormous files and you won’t fit many into the typical storage allowance on most phones. But if your device has USB On-The-Go support you can easily add temporary storage to your device, onto which you can store full-length movies or a larger music collection. You could access documents brought with you from your work computer, or if you add a memory card adapter you could even remove the card from your camera and instantly view, edit and share the photos as soon as you take them. Using the USB OTG Helper app on a rooted device the entire process can become completely seamless too.
1.Mount a drive
Head over to the play store to download USB OTG Helper. Plug a USB drive into a micro USB adapter and attach it to your phone. The app should launch automatically and detect the drive. Tap the Mount button to access the drive. 

2.Access your files
You’ll now see your drive listed – most file systems are supported including those used on Windows and Mac. Tap the drive to view files then simply access the files as you would normally. They will open in their associated app. 

3.… and unmount
When you’re finished you must remember to unmount the drive to prevent any errors occurring if you unplug it while it is still in use. Return to USB OTG Helper and tap the Unmount button. You can now safely unplug your drive.

App Screenshot
Read More...

FolderMount for Android - Save large files to an external card

Save space by forcing apps to store data on your SD card

Despite your phone shipping with 16 or even 32GB of internal storage, you might have noticed this total slowly ebbing away, chipped at with every app you install from the Google Play store.

One common reason for this is that associated data – things such as podcasts or large games (typically the ones that appear to install quickly before announcing that they need to download more data) – takes up space on your internal SD card. A solution to this might be to move some of your standard, small data files – photos, music etc – to your external SD card.

This can be fiddly and inconvenient, however, but there is a better solution in the shape of FolderMount, a root application that enables you to automatically store games, podcasts, navigation software files and so much more on your external SD card.
FolderMount, a free download, works by enabling you to pair folders, tricking the Android OS into thinking that the data file is on the internal storage rather than the external SD card. The end result is a smartphone or tablet with improved performance. Here’s how it works.

1.Understand folder pairs
After installing FolderMount from the Google Play store and assigning Superuser permissions as required on the first run, tap the ‘+’ symbol to add a new folder pair. Folder pairs are synced to fool Android into allowing app data storage on an external SD card.

2.Configure folder pairs
Assign an appropriate name and then select the Source folder – the location on your Android phone where the app or data you wish to move currently resides. Tap the tick symbol to confirm the request, and repeat the process for Destination, adding a folder if necessary.

3.Exclude media files
One of the most common uses for FolderMount is to move space-hogging video files to your external storage card. A drawback of this, however, is that you might end up with duplicates in your phone gallery. Use the Exclude from media scan option to avoid this.

4.Edit a saved folder pair
When a new folder pair is added by a user, FolderMount will offer to move the data. Tap the Yes command to agree and wait patiently for a moment. Once the data is moved to the external storage location, tap on the pin icon, which should turn green instantly.

5.Data is not duplicated
Although data might appear in both the source and destination locations, it is in fact only present in one place. You can check this by unpinning the paired folders. Use the Settings screen to ensure that your paired folders are mounted when you boot Android.

App Screenshot
Read More...

Startup Manager - Increase your Android device RAM

Is your Android running out of precious memory? By blocking applications from automatically launching you can keep vital resources available for the apps you really need…
1.Install Startup Manager, assign permissions
You’ll find Startup Manager in the Play store (choose between the free ad-supported and paid versions). After installation you will need to assign Superuser/root privileges to the app, something that is only possible if you have rooted your handset.

2.Manage your startup items
Upon launching, Startup Manager will scan Android to check for apps that are configured to open at startup. There are three views: User, System and Customize. Use the Disable All button in the User view to instantly block apps from opening automatically.

3.Disabling startup items
Each item listed is accompanied by a blue circle with a minus symbol – by tapping this you disable the app in question, preventing it from being launched when you start Android. Mistakes can be undone by tapping the grey ‘+’ symbol that appears instead.

4.Customise startup apps
The Customize view is probably the most important. Using the Add Startup Items button you can select apps that will load when your phone boots. As a final check, activate the third option in the Settings screen to see which items couldn’t be disabled.
App Screenshot
Read More...

MacroDroid - Automate common tasks in Android

With MacroDroid you can program Android to complete a whole range of everyday tasks

Those nighttime emails can prove particularly annoying, especially at 3am. A common way of avoiding the alerts is to disable connectivity as you go to bed, but if you’ve had a long day or a busy evening, you can very easily forget to do that.

So why not automate the process? Using a tool such as MacroDroid (Google Play, from free) you can program Android to behave in particular ways based on time, location and other criteria. Creating a trigger and an action is simple, and by adding constraints to the macro program you can, for example, make a call at a particular time of day or answer calls automatically.
MacroDroid can also be used to disable Wi-Fi connectivity and mobile data at a particular time and then reactivate it later on – such as when you go to bed and when you intend to wake up.

Creating a macro to do this is straightforward, and a good way of exploring the potential of this app. It might just give you a good night’s sleep, too! Follow the eight steps across these pages to get started.

1.Add a new macro
You’ll find MacroDroid available in the Play store, where it is listed as a free app. After installation, launch the app and select Add Macro to begin. Note that you can find details about triggers, actions and constraints by long-pressing the corresponding item.
2.Select your trigger
For this tutorial we’re creating a macro that will disable and enable Wi-Fi at particular times of the day. To start with, we need to select our trigger, in this case the Day/Time Trigger option. Select, and set the time with which to trigger the macro using the intuitive selection boxes.
3.Adding an action
A trigger requires an action, so browse through the list for Enable/Disable Wifi. The Enable Wifi option should be chosen here, putting you half way towards your smartphone connecting to your local wireless network each morning. To finish, you need to add a constraint.
4.Limit macro behaviour
Your macro isn’t quite ready yet – you need to add a constraint which will limit the action we’ve already set so that it only works under certain conditions. Set a Time of day duration from the point you wish to disable wireless, ending one minute before the trigger time set earlier.
5.Save and name
Confirm your constraint and tap the right arrow to give the macro an appropriate name and save it. Make sure the name you assign is descriptive, as you might end up with quite a few macros that you will need to quickly identify, so keep it memorable.
Read More...

DataSync - Share your saved games across devices

Want to play the same game on two different devices? DataSync is the answer If you own more than one Android device there’s a good chance that you have installed some of the same apps on them. While this is fine for most things, it can be a major source of frustration when it comes to games. You reach a certain level on your phone, but when you pick up to play on your tablet you have to start right back at the beginning.

What you need is to be able to share your progress between your devices. By syncing progress from one Android to another or even by saving your progress to the cloud, you can introduce cross-device continuity into your gaming world. This might prove useful for a game with levels that require a particular amount of control, or if you simply want to get a better appreciation of the graphics.

All of this (and quite a bit more) can be achieved using DataSync, a free application from Google Play that requires two or more rooted Android devices for successful use.
1.Install & grant Superuser permission
Available free from Google Play, DataSync will need Superuser (root) permissions assigning upon first run. Once this is done, you will be presented with the Queues view. For now, ignore this and instead swipe left to view the applications you can sync.

2.Prepare your account
DataSync can sync your mobile game or app data to Dropbox or Box cloud storage accounts. You’ll find the option to use this paid feature in the Settings menu, and naturally you will need to input your username and password for your preferred cloud service.

3.Syncing to another Android device
If you are planning to sync your app, game or data with another device, use the networking section of the Settings menu, where you will see options to add a device and specify a server port (although the default 4444 option should be okay).

4.Time to sync
With your method of syncing established, it is time to choose the app or apps that you want to sync between your devices. All you need to do is return to the main screen of the app and in the Applications tab scroll through the list, tapping the apps you want to sync.

5.Save your queue and sync
As apps are added to your queue, you’ll notice the total increase at the foot of the screen. When you’re done, click the save icon and name the queue, then tap the sync button to sync with another device, cloud storage or a local backup.

6.Using your synced app
Whether you plan to sync via Bluetooth, the cloud or your local network, other Android devices must also have DataSync installed. A sync can be completed by tapping the sync button on the other device – soon you’ll be seamlessly picking up where you left off.

App Screenshot
Read More...

Sunday 19 May 2013

20 Most Innovative Free Android Apps

TorGuard
Are you using a VPN on your Android phone?

Virtual private networks secure your internet activity when your browsing, torrenting or consuming media. 

VPNs are mandatory if you plan on using your phone in an airport of a cafe with unsecured Wi-Fi. 

Use code "best10VPN" and click here to get your VPN. Then click here to download the TorGuard Android app

Read a TorGuard VPN review here


Skyvi (Siri for Android)
A viable alternative to Apple’s Siri AI engine
Siri has been hanging around on Apple devices for a while now, but there are plenty of options available to Android users who want their own digital assistant. Skyvi is one of the best around, and lets you send texts, search the internet, and even have a chat with your phone.
Awesome Drop
Drag and drop in a web browser to sync files
There’s something so simple about Awesome Drop that it almost beggars belief. Point your PC’s HTML5-enabled web browser to a URL, type the code you find there on your phone and you can simply drag and drop files to your browser and sync them with your phone. It’s that easy and an app we think can be of great use of you.
Field Trip
Uses your location to keep you up to date with deals, facts and interesting places around you. Perfect for ensuring you get the most out of the cities you visit.
CamScanner
Scan a document on your phone and this app will automatically change it into a PDF, saving you a lot of hassle with scanners, wires, and emailing things to yourself.
Swapps!
A swipe from the left-side of the screen instantly brings up a list of all the apps you’ve got installed, whatever app you’re in or home screen you’re on.
GO TouchHelper
A gorgeous app that gives you quick access to the most often-used parts of your device
If you’re not sure about switching to a different launcher app, GO TouchHelper offers the perfect solution. Essentially it’s an app that collates the most important parts of your Android experience into one easy-to-understand screen. You’ll see the people you contact most frequently, the last text message you received, the time, your alarms, and a host of other useful and pertinent information. There are themes you can download to change the look of the app too, although the default setting is probably one of the nicest looking apps we’ve seen. GO TouchHelper’s strength is that it bypasses a lot of what goes into customising your Android device. Here’s everything you need presented in one great-looking package. You’ve still got the rest of your phone for your apps and files, but the main stuff you’re going to be using on a regular basis is collected in one handsome and incredibly easy-to-use application. And if you want you can make it look like your phone is running the Windows Phone OS. GO TouchHelper is a great idea, brilliantly implemented, that makes you think about the different ways you use your Android device. And it looks great too.
Onavo Extend
Extends your Android data plan
An ingenious app that could save you money on your 3G, Onavo Extend essentially compresses the amount of data you’re using, finding some pretty impressive savings for you in the process. If you often find yourself going over your data limit, then you need to grab this app right now.
Shush!
Turn your ringer back on after a set time
Shush! is a clever, free application that lets you set a time limit for turning your phone on silent. Mute your phone and Shush! will then pop up to ask you how long you want it to be quiet. This essential download means you’ll never miss an important call because you forgot to put your ringer on again.
Screen Filter
Dim your screen far more than the native settings allow
Staring at a screen is a decent way to get a headache, and while Android has built-in brightness controls, sometimes they’re not enough. That’s where Screen Filter comes in. Fine grained controls let you set your level, and you can even use Locale or Tasker to change brightness.
Waze
Community generated traffic alerts
Waze is designed so you don’t have to combat the long commute to work alone. It’s a social network for drivers that lets you add alerts and recommendations to keep others abreast of what the fl ow of traffic is like. Just driving with the app open sends details to the Waze servers about traffic speed. A great idea that can only get better as more people pick it up.
Google Keep
Keep track of your thoughts, ideas and plans with this stylish and easy-to-use note-taking app from Google that syncs across all of your desktop and mobile devices.
Vivino Wine Scanner
Take a photo of the wine you’re drinking and this app will match it with its database of over 500,000 tipples, showing you reviews and tips.
Viddy
Instagram for video. Capture a 15-second clip, add one of a wide range of different and exciting filters, then upload them to your social networks and share with your friends.
Gifinator
A brilliant app that lets you quickly create an animated gif, then share it with your friends. Fun to use and surprisingly addictive, you’ll be ‘giffing’ everything.
Feedly
A gorgeous RSS reader designed for Android devices
An RSS reader might not sound like the sort of app you’d put on a list concerning cutting-edge innovation, but Feedly is such a unique way to keep up to date with your favourite sites and blogs it’d be wrong not to. Slick, polished and special, try this and you’ll never go back.
Magnifying Glass
Use your device’s camera to zoom in on things
Magnifying Glass lets you use the camera on your Android smartphone to magnify text for a much closer look. A simple user interface makes zooming in a piece of cake and the app uses the focus modes and fl ash of your device’s camera to ensure the image you’re looking at is crystal clear.
Toucher
Everything you need right at your fingertips
Sometimes it’s the simplest ideas that you get the most out of. That’s especially true with Toucher, an app that lets you put a single finger in charge of the most important aspects of your Android device. Once you’ve installed the app you’ll see a grey circle at the side of your screen – tapping that opens up the Toucher launcher, which gives you access to a variety of different options. You can set up your favourite apps, for example, and access them at anytime by tapping the circle, which handily hovers in the corner even when you’re in a different app. You’ll also get quick access to a set of toggles that let you play with the basic settings of your phone, like turning off Wi-Fi or Bluetooth or changing the brightness. It’s great to have constant, quick access to the apps you use the most, and you can customise them too, if something new enters your app rotation. Throw in downloadable themes that let you change the way the launcher looks and you’re left with a strikingly simple idea that gives you an extra degree of control over your Android device, and looks brilliant while it’s at it.
Emoji Keyboard
Turn your Android keyboard into a hotbed of signs and symbols
Rooting your Android device gives you lots more freedom to play around with the way things are presented, swapping out the fonts, for example, so they display tiny, cute emoticons. Obviously you’ll need some way of sending these Emoji, and that’s what Emoji Keyboard is for. With a few taps you can add a massive array of faces, symbols and signs. Simple and fun, Emoji Keyboard lets you express the gamut of human emotions, all from the comfort of your rooted device.
Gesture Launcher
Open apps with a quick onscreen scribble
If you’re sick of searching when you want to start an app then Gesture Launcher could revolutionise your Android use. You can set different scribbles to different apps so all you need to do is open Gesture Launcher, doodle the right shape on the screen, and your app will load.
Lock Pattern Generator
Create new lock patterns to protect your Android device
The lock pattern on your Android device is probably pretty easy to crack, but this app lets you generate complex patterns to make sure your phone or tablet doesn’t get any unwanted attention. Fast and simple to use, this takes one of Google’s innovations and moves it a step further.
Read More...